Artesyn System Management Interface Based on HPI-B (Centel User Manual download pdf (Page 93)

Using HPI-B

System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C)

FUMI allows to programmatically update the following software types on the following FRUs

within the Centellis 2000 R3.0/4411 environment.

A detailed description of FUMI is beyond the scope of this manual. Refer to the FUMI section in

SAI-HPI-B-02.01 specification for detailed description. For release-specific restrictions of the

FUMI functionality, refer to the system release notes, which are delivered together with your

system.

In order to get started with FUMI, you may want to use the hpifumi example tool, which is

delivered as part of the HPI-B client RPMs. Just like the other example applications (see

Appendix A, Example Applications), hpifumi is invoked via the command line and is controlled

via command line parameters. It internally invokes FUMI function calls. A detailed description

of hpifumi is given below.

Description

hpifumi allows to invoke underlying FUMI function calls via the command line interface, and

thus update software images via the command line interface.

Table 4-53 Firmware Update Management Instrument-Supported Image Types and Blades/FRUs

Image Type Upgradeable by FUMI on the following Blades/FRUs

IPMC/MMC firmware ATCA-7221

ATCA-MF106

ATCA-7107

SAM1411

All ATCA boards and AMCs/RTMs supporting HPM.1 upgrade via IPMI

When upgrading blades or other FRUs, make sure to use only images provided by Artesyn and

make sure that the image types and versions are suitable for the blade or FRU which you want

to upgrade. You should use the images in tar format which contains the upgrade image itself

and some metainfo.

When upgrading IPMC firmware images, OEM FRU data records are by default preserved

during the upgrade. Whether OEM FRU data records are preserved or not, can be configured

in the configuration file /etc/bbs-hpib/bbs-hpib.conf in the section ipmidirect. The entry is:

FumiPreserveOemrecords = yes/no (yes = default).

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 135 136

No comments

Artesyn System Management Interface Based on HPI-B (Centel User Manual Page 93