Artesyn System Management Interface Based on HPI-B (Centel User Manual download pdf (Page 64)

Using HPI-B

System Management Interface Based on HPI-B (Centellis 2000 R3.0/4411) User’s Guide (6806800P20C)

4.5.7 Active and Stand-By HPI Daemon Sensor

The Artesyn HPI-B implementation provides two sensors which allow to detect which of the

two HPI daemons in a system is the currently active, and which is the currently deactivated

one. There are two sensors: one which represents the currently active HPI daemon, and one

which represents the currently deactivated daemon. Both sensors are Artesyn OEM sensors,

but the structure of their RDR is similar to the RDR of the standard Active and Standby Shelf

Manager sensors which are described in the HPI-to-AdvancedTCA mapping specification.

Both Sensors are logical Sensors which do not have counterparts in the IPMI or AdvancedTCA

realm. Applicable events and readings are generated by the HPI implementation.

Both Sensors are modeled as Presence Sensors.

Table 4-23 HPI Daemon Redundancy Sensor Event State

MotHpiEventStateT Value Notes

EventState SAHPI_ES_FULLY_REDUNDANT |

SAHPI_ES_NON_REDUNDANT_SUFFICIENT_RESOURC

Table 4-24 Active and Stand-By HPI Daemon Sensors RDRs

SaHpiRdrT Value Notes

RecordId Assigned by HPI implementation

RdrType SAHPI_SENSOR_RDR

Entity Same as Virtual Shelf Manager

Resource

IsFru SAPHI_FALSE Per the rules

stated in [HPI], the

IsFru flag is not

applicable when

the

ManagementInstr

ument is directly

associated with

the Resource, as is

the case here.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 135 136

No comments

Artesyn System Management Interface Based on HPI-B (Centel User Manual Page 64