Artesyn MOTLoad Firmware Package User's Manual (Febru User Manual Page 256
- Page / 282
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Remote Start
MOTLoad Firmware Package User’s Manual (6806800C24D)
256
B.2.10 Remote Start Error Codes
These are the 16-bit values that the target board returns in the Data/Result field of the IBCA
when the target board detects an error in the processing of a host command. These error codes
are valid only if the ERR bit was set in the IBCA.
B.2.11 VME Remote Start
Remote Start in a VME chassis adheres to the protocol defined throughout this chapter. In
addition, several Global Environment Variables (GEVs) control various aspects of VME Remote
Start. These GEVs are stored in NVRAM, and may be accessed with standard MOTLoad GEV
utilities (gevEdit, gevShow, gevDelete, gevList). Note that GEVs are always case-sensitive, so
they must be provided exactly as shown, below. The GEVs, and their meanings, are:
mot-vmeRemoteStartMBox
This GEV selects which VME bridge device mailbox is used as the Inter Board
Communication Address (IBCA). Valid values are 0 - 3. The default mailbox is mailbox 0. If
the GEV is missing, or set to an invalid value, the default mailbox is used.
mot-vmeRemoteStartOff
This GEV allows the user to disable Remote Start for the VME board. When Remote Start is
disabled, the board will not modify or monitor the IBCA for Remote Start commands. If the
GEV does not exist, remote start services will be provided. If the GEV does exist, but is set
to a value of 0, remote start services will be provided. All non-zero values of mot
vmeRemoteStartOff GEV will disable remote start services.
VMEbus interrupts are not generated by the Remote Start feature. The host should poll the
IBCA OWN bit to determine if a command has completed, and not write to the IBCA unless the
OWN bit is set.
Table B-1 Command/Response Error Codes
Error Code Associated Opcode: Command Definition of the Error Code
0x0001 0x03:Write/Read memory Illegal access size requested
0x0002 n/a Unsupported command opcode requested
0x0003 Allocate Memory Allocation failed
- MOTLoad Firmware Package 1
- Trademarks 2
- Contact Address 2
- Contents 10
- List of Tables 11
- About this Manual 13
- Abbreviations 14
- Conventions 14
- Summary of Changes 16
- Introduction 19
- 1.1.4 MOTLoad Tests 20
- Using MOTLoad 23
- 2.1.2 Command Line Help 24
- 2.1.3 Command Line Rules 25
- 2.1.4 Command History Buffer 26
- 2.1.5 pseudo-Vi Mode 26
- 2.3 User Download Buffer 31
- 2.4.1 Error Message Formats 32
- 2.4.2 IOCTL Codes (Block) 32
- 3.1.2 as 41
- 3.1.3 bcb bch bcw 43
- 3.1.4 bdTempShow 44
- 3.1.5 bfb bfh bfw 45
- 3.1.6 blkCp 46
- 3.1.7 blkFmt 48
- 3.1.8 blkRd 49
- 3.1.9 blkShow 51
- 3.1.10 blkVe 52
- 3.1.11 blkWr 54
- 3.1.12 bmb bmh bmw 56
- 3.1.13 br 57
- 3.1.14 bsb bsh bsw 58
- 3.1.15 bvb bvh bvw 59
- 3.1.16 cdDir 60
- 3.1.17 cdGet 62
- 3.1.18 clear 64
- 3.1.19 cm 65
- 3.1.20 csb csh csw 67
- 3.1.21 csUserAltBoot 68
- 3.1.22 devShow 69
- 3.1.23 diskBoot 70
- 3.1.24 docBoot 73
- 3.1.25 docProgram 75
- 3.1.26 docRead 77
- 3.1.27 downLoad 78
- 3.1.28 ds 80
- 3.1.29 echo 82
- 3.1.30 elfLoader 83
- 3.1.31 errorDisplay 86
- 3.1.32 eval 88
- 3.1.33 execProgram 90
- 3.1.34 fatDir 91
- 3.1.35 fatGet 93
- 3.1.36 fdShow 95
- 3.1.37 flashLock 97
- 3.1.38 flashProgram 100
- MOTLoad Commands 101
- 3.1.39 flashShow 103
- 3.1.40 flashUnlock 104
- 3.1.41 gd 107
- 3.1.42 gevDelete 108
- 3.1.43 gevDump 109
- 3.1.44 gevEdit 111
- 3.1.45 gevInit 112
- 3.1.46 gevList 113
- 3.1.47 gevShow 114
- 3.1.48 gn 115
- 3.1.49 go 116
- 3.1.50 gt 117
- 3.1.51 hbd 118
- 3.1.52 hbx 119
- 3.1.53 help 120
- 3.1.54 l2CacheShow 122
- 3.1.55 l3CacheShow 123
- 3.1.56 mdb mdh mdw 124
- 3.1.57 memShow 125
- 3.1.58 mmb mmh mmw 126
- 3.1.62 netBoot 132
- 3.1.63 netShow 135
- 3.1.64 netShut 137
- 3.1.65 netStats 138
- 3.1.66 noCm 140
- 3.1.67 pciDataRd 141
- 3.1.68 pciDataWr 142
- 3.1.69 pciDump 143
- 3.1.70 pciShow 144
- 3.1.71 pciSpace 146
- 3.1.72 ping 148
- 3.1.73 portSet 150
- 3.1.74 portShow 152
- 3.1.75 rd 153
- 3.1.76 reset 154
- 3.1.77 rs 155
- 3.1.78 set 156
- 3.1.79 sromRead 158
- 3.1.80 sromWrite 160
- 3.1.81 sta 162
- 3.1.82 stl 164
- 3.1.83 stop 166
- 3.1.84 taskActive 167
- 3.1.85 tc 169
- 3.1.86 td 170
- 3.1.87 testDisk 171
- 3.1.88 testDocHwInt 173
- 3.1.89 testEnetPtP 174
- 3.1.90 testNvramRd 175
- 3.1.91 testNvramRdWr 176
- 3.1.92 testRam 177
- 3.1.93 testRamAddr 179
- 3.1.94 testRamAlt 181
- 3.1.95 testRamBitToggle 182
- 3.1.96 testRamBounce 184
- 3.1.97 testRamCodeCopy 185
- 3.1.98 testRamEccMonitor 186
- 3.1.99 testRamMarch 187
- 3.1.100 testRamPatterns 188
- 3.1.101 testRamPerm 189
- 3.1.102 testRamQuick 190
- 3.1.103 testRamRandom 191
- 3.1.104 testRtcAlarm 192
- 3.1.105 testRtcReset 193
- 3.1.106 testRtcRollOver 194
- 3.1.107 testRtcTick 195
- 3.1.108 testSerialExtLoop 196
- 3.1.109 testSerialIntLoop 197
- 3.1.110 testStatus 198
- 3.1.111 testSuite 200
- 3.1.112 testSuiteMake 203
- 3.1.113 testThermoOp 205
- 3.1.114 testThermoQ 206
- 3.1.115 testThermoRange 207
- 3.1.116 testWatchdogTimer 208
- 3.1.117 tftpGet 209
- 3.1.118 tftpPut 212
- 3.1.119 time 215
- 3.1.120 transparentMode 217
- 3.1.121 tsShow 219
- 3.1.122 upLoad 220
- 3.1.123 version 222
- 3.1.124 vmeCfg 223
- 3.1.125 vpdDisplay 225
- 3.1.126 vpdEdit 227
- 3.1.127 wait 229
- 3.1.128 waitProbe 230
- MOTLoad Non-Volatile Data 231
- A.2.4 Restoring the Archive 233
- A.2.5 Editing VPD 234
- A.3.2 Reserved GEVs 236
- A.3.2.2 Network GEVs 238
- A.3.2.4 Disk Boot Option GEV 239
- A.3.2.5 Boot Results GEV 239
- A.3.2.6 IDE GEV 240
- A.3.2.7 SCSI GEV 241
- A.3.2.8 Test Suite GEVs 241
- A.3.2.10 Other GEVs 242
- A.3.3 Viewing GEV Values 243
- A.3.4 Viewing GEV Labels 243
- A.3.5 Creating GEVs 244
- A.3.6 Editing GEVs 245
- A.3.7 Deleting GEVs 245
- Remote Start 247
- B.2.11 VME Remote Start 256
- VME Configuration Parameters 263
- C.4 Editing VME Settings 264
- C.5 Deleting VME Settings 265
- Auto Boot 267
- D.2 Auto Boot From a Disk 268
- Appendix E 271
- E.1 Overview 271
- E.2 Safe Start 271
- E.3 Alternate Boot Images 272
- E.4 Firmware Startup Sequence 272
- E.6 Valid Boot Images 274
- E.6.1 Checksum Algorithm 275
- E.6.2 Boot Image Flags 275
- Related Documentation 279
© 2020, manymanuals.com. All rights reserved. | 1.157 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals