Artesyn System Services Framework Installation and Use (No User Manual download pdf (Page 76)

Additional Information

System Services Framework Installation and Use (6806800S58E)

Configuring multiple shelves in HPI-B client's configuration file:

1. Configure

SSF for Hardware Management.

 Make the following changes to the /opt/bladeservices/etc/bbs-hpib/

bbs-hpibmultishelf.conf file at the SSF running location.

– Create a new entry with the values:

Daemon= <IP Address of new shelf>

port=4743(standard port on which BBS-HPIB server is running)

2. SSF Configuration for services and application management.

 By default, all blade SSF core agents and Application Agents are configured to contact

SSF core on IP Address 192.168.21.100.

If in your configuration SSF Core is running on different IP than this, please update

emindtcpAddress parameter with correct IP address in the ssfApi.conf file mentioned

in Blade SSF Core Configuration and SSF Application Agent Configuration.

Restart the services after making any change in the configuration. For more information, refer

Starting Blade SSF Core and Starting SSF Application Agent.

A.5 System Log Collection

System Log Collection commands are used to collect system Logs from different blades to SSF

core and then to download those from SSF core to user specified locations.

For more information on System Log Collection CLI and XML commands refer to System Services

Framework Command Line Interface Usage and System Services Framework XML Interface Guide.

A.6 Installing SSF on PrAMC-7311 using Ramdisk

Installation

The below procedure explains how to modify the Root File System stored in initramfs file,

intitramfs.cpio.gz. For more information, refer BBS on PrAMC-7311Programmer’s

Reference guide.

# cd /tftpboot/<blade or module to be modified>

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 82

No comments

Artesyn System Services Framework Installation and Use (No User Manual Page 76